51 16 000 Removing And Installing/Replacing Mirror On Left Or Right Front Door
Necessary preliminary tasks:
- Detach cover on door window frame in area of mirror. See 51 32 160 REMOVING AND INSTALLING/REPLACING HOUSING COVER ON INNER LEFT OR RIGHT DOOR WINDOW FRAME .
NOTE:
Secure mirror against falling off.
Disconnect plug connection (1).
Press rubber guide (2) to one side and release screws (3).
Tightening torque. See BODY EQUIPMENT - TIGHTENING TORQUES .
Installation:
Make sure grommet for plug connection (1) is correctly seated
Replacement:
Due to the thread-tapping screws, the tightening torque of the new mirror is increased by 2 Nm.
Remove mirror (1) outwards.
Installation:
Check function.
Installation:
Acoustic insulation (1) must not be damaged.