34 21 Rear Brake Discs E70
TECHNICAL DATA - REAR BRAKE DISCS E70
| Different thicknesses on brake linings | max. mm | 0.01 |
| Max. machining limit per friction ring side (M vehicles and perforated brake discs must not be machined). Brake disc minimum thickness (MIN TH) must not be undershot. | mm | 0.8 |
| Nominal size (diameter x thickness) | mm | 345x24 |
| Brake disk minimum thickness (MIN TH) stamped on brake disk body | mm | 22.4 |
| Nominal size (diameter x thickness) | mm | 320x20 |
| Brake disk minimum thickness (MIN TH) stamped on brake disk body | mm | 18.4 |
| Wear warning from residual lining thickness | mm | 3.7 |