34 41 220 Removing and Installing/Replacing All Handbrake Shoes
Special tools required:
- 34 4 000. See 34 4 000 ALLEN KEY
Installation:
- Remove rear brake disc. See 34 21 320 Removing and Installing Or Replacing Both Rear Brake Discs
- Release electromechanical parking brake (EMF)
After completing tasks, adjust handbrake. See 34 41 006 Adjusting Parking Brake
Disconnect return springs (1) with brake spring pliers.
Installation:
Check return springs (1) and replace if necessary.
Return springs (1) must not be mixed up.
Pay attention to installation position of adjustment screw (2).
Apply a thin coat of grease to bush and screw threads, Refer to BMW Service Operating Fluids.
NOTE:
Illustration does not show wheel hub.
Turn clamping pins (1) with special tool 34 4 000 (See 34 4 000 ALLEN KEY )through 90° and disconnect.
Remove brake shoes (2).