52 10 Front Seats
TIGHTENING TORQUES - FRONT SEATS
| Type | Thread | Tightening Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Seat to floor plate | E70 | (trilobular) | Replace Powerlok screw | 43 Nm |
| 2AZ Backrest frame to seat frame | E70 | (trilobular) | Replace Powerlok screw | 31 Nm |
| 3AZ Active head restraint -Sliding rails with gas cartridge | E70 | 8 Nm | ||
| 4AZ Carrier section for electr. actuating unit | E70 | 8 Nm | ||
| 5AZ Trim to seat | E70 | Torque angle | 4 Nm | |
| 6AZ Seat rails to seat frame | E70 | Replace Powerlok screw | 27 Nm | |
| 7AZ Adjusting switch to trim | E70 | 2 Nm |