52 26 008 Removing and Installing/Replacing Left/Right Sides Of Backrest On Rear Seat Backrest (Through-Loading)

Pull seat belt to middle and place behind head restraint.

Unclip backrest side section in direction of arrow (1) towards front and pull out in direction of arrow (2).

Fig 1: Uncliping Backrest Side Section

Courtesy of BMW OF NORTH AMERICA, INC.

If necessary, pull out clip (1) towards front.

Fig 2: Pulling Out Clip

Courtesy of BMW OF NORTH AMERICA, INC.

Check clip (1) and locator (2) for damage.

Snap clip (1) into locator (2) of backrest side section.

Fig 3: Identifying Clip And Locator

Courtesy of BMW OF NORTH AMERICA, INC.

Insert guides (1) into locators.

Clip backrest side section at top into place.

Installation:

Make sure backrest side section is correctly seated in locators.

Fig 4: Identifying Guides

Courtesy of BMW OF NORTH AMERICA, INC.