52 26 005 Removing and Installing / Replacing Rear Seat

Unclip rear seat on left and right towards top.

Installation:

Feed seat belt buckles (1) into openings in rear seat.

Fig 1: Identifying Seat Belt Buckles

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1) on seat belt (middle).

Tightening torque 72 11 22AZ. See 72 11 SEAT BELTS

Installation:

Seat belt is coded against incorrect installation.

Feed out anchor fitting (2) through rear seat.

If necessary, unlock and disconnect plug connection for seat heating.

Lift out rear seat.

Fig 2: Identifying Seat Belt Screw

Courtesy of BMW OF NORTH AMERICA, INC.