12 52 Plug connections, terminals, loose parts (M57T2)
TIGHTENING TORQUE SPECIFICATION - PLUG CONNECTIONS, TERMINALS, LOOSE PARTS (M57T2)
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Wiring harness to starter (terminal 50) | M6 | 7.5 Nm | ||
| 2AZ Wiring harness to alternator B+ | M8 | 19 Nm | ||
| 3AZ DDE wiring harness pick-off to support point | M6 | 9 Nm | ||
| 4AZ Injector guide strip to cylinder head cover | 50x19.5 | 2.5 Nm | ||
| 5AZ Cable duct to cylinder head | M6x12 | 4 Nm | ||
| 6AZ B+ lead to starter (term. 30) | M8 | 13 Nm | ||
| 7AZ Battery positive terminal B+ lead | M8 nut | 15 Nm | ||
| M8x14 | 21 Nm | |||
| M8 | Self-locking | 21 Nm | ||
| Screw with inner star | 13 Nm | |||
| 8AZ Corrugated tube holder to cylinder head cover | 50x19.5 | 2.5 Nm | ||
| 9AZ Ground, engine wiring harness to ground point | M6 | 9 Nm |