51 71 039 Removing And Installing/Replacing Front Left Or Right Wheel Arch Cover (Rear Section)

Necessary preliminary tasks:

NOTE: Work shown on X5 3.0i by way of example, deviations in detail are possible in other models.

Release screws/nuts (1 and 2).

Feed out wheel arch cover (3).

Installation:

Ensure wheel arch cover (3) is correctly seated.

Fig 1: Identifying Wheel Arch Cover

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Make sure all covers in wheel arch are correctly seated in relation to each other:

Left side only:

Rear cover (1) overlaps cover (3) in area (B).

Fig 2: Identifying Cover And Overlaps Cover
Courtesy of BMW OF NORTH AMERICA, INC.