51 47 128 Removing And Installing/Replacing Panel For Luggage Compartment Floor

Push retaining spring (1) to end of gas-filled strut.

Remove gas-filled strut from ball head.

Firmly pull luggage compartment floor (2) towards rear and thereby disengage from hinges (3).

Fig 1: Pushing Retaining Spring

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Release screws (1).

Remove hinge (2).

Fig 2: Identifying Screws And Hinge

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove retaining plate (2).

Fig 3: Identifying Screws And Retaining Plate

Courtesy of BMW OF NORTH AMERICA, INC.