51 32 170 Removing And Installing/Replacing Door Window Glass, Front Left Or Right
Necessary preliminary tasks:
- Remove sound insulation in front door . See 51 48 060 REMOVING AND INSTALLING/REPLACING SOUND INSULATION IN LEFT OR RIGHT FRONT DOOR .
- Remove inner window cavity seal . See 51 21 330 REMOVING AND INSTALLING/REPLACING WINDOW CAVITY COVER STRIP ON INNER FRONT DOOR .
Open door window glass (1) down to distance (A)
A= approx. 120 mm
IMPORTANT:
Danger of locking in position!
Disconnect plug connection (1) on power window motor.
Disconnect plug connection (1) on power window motor.
Carefully press catch (2) with screwdriver (3) towards rear and slide door window glass upwards.
Installation:
Catch (2) must be correctly clipped into place.
Carry out function check on power window unit and anti - trapping protection.
If necessary, normalize power window unit. See 67 62 000 REMOVING AND INSTALLING/REPLACING FLAT MOTOR FOR FRONT LEFT OR RIGHT POWER WINDOW UNIT .
Turn door window glass and lift out towards rear/top.
Installation:
Door window glass does not need to be adjusted.