51 24 145 Removing And Installing/Replacing Button For Rear Lid Actuation

Special tools required:

Move special tool 00 9 323 under front edge of button (1) and lever out button (1).

Pull button (1) out of rear lid (2).

Fig 1: Identifying Special Tool (00 9 323)

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug (1) and remove button (2).

Installation:

Perform function check with rear lid open.

Fig 2: Identifying Plug And Button

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carefully release catches (1) and remove microswitch (2).

Fig 3: Identifying Catches And Microswitch

Courtesy of BMW OF NORTH AMERICA, INC.