51 24 110 Removing And Installing/Replacing Lock For Rear Lid Upper Section

Necessary preliminary tasks:

Release screw (1).

Feed out Bowden cable (2) and remove cover (3).

Fig 1: Identifying Screw And Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Feed out lock (2), disconnect plug connection and remove lock (2).

Fig 2: Identifying Screws And Lock

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Unhook Bowden cable (1) from lock (2).

Fig 3: Identifying Bowden Cable

Courtesy of BMW OF NORTH AMERICA, INC.