51 22 300 Removing And Installing/Replacing Window Cavity Cover Strip On Rear Door On Left Or Right

Special tools required:

IMPORTANT: Observe procedure for using special tool 00 9 324.

IMPORTANT: If reusing the existing window cavity cover strip (1), make sure it is not bent.

Lever out window cavity cover strip (1) with special tool 00 9 324 (starting at B-pillar).

At same time raise window cavity cover strip (1) with special tool 00 9 317 in area of B-pillar.

Fig 1: Identifying Window Cavity Cover Strip

Courtesy of BMW OF NORTH AMERICA, INC.