61 31 334 Removing And Installing Or Replacing Grip Trim For Gear Selector Switch

Special tools required: 

• 64 1 030 

Turn end ring (1) in direction of ring and lower.

Fig 1: Turning End Ring

Courtesy of BMW OF NORTH AMERICA, INC.

Insert special tool 64 1 030  from below into trim (1) and carefully pull off trim (1).

Remove symbol plate (2).

Fig 2: Identifying Special Tool (64 1 030)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

To facilitate fitting, secure pushbutton (3) with adhesive tape on trim (1).