51 14 006 Replacing Number/Letter Combination On Left Or Right
IMPORTANT:
The Instructions for number/letter combination cementing
serve as the basis for these repair instructions and must be followed without fail. See 51 14 ... INSTRUCTIONS FOR ATTACHING NUMBER/LETTER DESIGNATION COMBINATION .
Fitting dimensions (E70):
Stick on adhesive tape (1) according to measurement "A" to trim strip (2).
Mark measurement "B" from top edge to adhesive tape (1).
Position model designation and stick down.
Dimensions:
FITTING DIMENSIONS CHART
| Left | Right | |
|---|---|---|
| A | 8.6 mm | 8.6 mm |
| B | 76 mm | 78 mm |