51 23 212 Removing and installing/replacing cable for front engine hood locks (to locks)
Special tools required:
Necessary preliminary tasks:
- Remove engine hood locks on left and right, see 51 23 100 Removing and installing/replacing right engine hood lock
Lever out cover (1) from clutch (2) in direction of arrow and remove.
Lever out Bowden cable (3) in direction of arrow.
Unclip cable for engine hood locks (1) with special tool 00 9 317 in direction of arrow and feed out of front panel.
Installation:
Catches (1 and 2) on cable for engine hood locks (3) must not be damaged.