51 34 211 Replacing rubber guide for rear left or right door window
Special tools required:
Necessary preliminary tasks:
- Remove cover on inside door window frame, see 51 34 160 Removing and installing/replacing housing cover on inner left or right door window frame
NOTE:
Rubber guide must be replaced after every complete removal.
Lever out rubber guide (1) on door window frame at front (2) with special tool 00 9 317.
Feed out rubber guide (1) towards top.
Installation:
Close door window glass (1) a little.
Push rubber guide (2) onto door window glass (1) and into window guide (3).
Moisten rubber guide (2) with water.