51 11 145 Removing and installing/replacing center insert for bumper trim
Necessary preliminary tasks:
- Remove front bumper trim, see 51 11 156 Removing and installing front bumper trim (up to 09/2006)
- Remove center radiator grille, see 51 13 001 Removing and installing/replacing front radiator grille, middle left or right
NOTE:
The operation is described on the left side; proceed in the same way for the right side.
Version with headlight washer system:
Release lock (1).
Feed hose (2) in direction of arrow out of holder (3).
Release catches (1) and remove center insert (2) in direction of arrow.
Installation:
Catches (1) on bumper trim (2) must not be damaged.