LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> X3 Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body Equipment - Repair >> 11 front bumper >> 51 11 140 Removing and installing/replacing bumper trim upper section (up to 09/2006)

51 11 140 Removing and installing/replacing bumper trim upper section (up to 09/2006)

Necessary preliminary tasks: 

NOTE: The operation is described on the left side; proceed in the same way for the right side.

Release screws (1).

Unhook catches (2) on bumper trim (3).

Fig 1: Catches, Screws And Bumper Trim
G04788323Courtesy of BMW OF NORTH AMERICA, INC.

Release catches (1) and remove upper section of bumper trim (2).

Fig 2: Catches And Bumper Trim
G04788324Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

If necessary, replace faulty metal nuts (1) on upper section of bumper trim (2).

Replacement: 

Remove center radiator grille, see 51 13 001 Removing and installing/replacing front radiator grille, middle left or right 

Version with headlight washer system: 

If necessary, remove spray nozzles (3), see 61 67 045 REMOVING AND INSTALLING/REPLACING SPRAY NOZZLES FOR LEFT OR RIGHT HEADLIGHT CLEANING SYSTEM

Fig 3: Metal Nuts And Bumper Trim
G04788325Courtesy of BMW OF NORTH AMERICA, INC.