28 00 Double Clutch Gearbox
Transmission In General
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| Torx screw, steel | GS7D36SG | M8x50 | 19 Nm | |
| GS7D36SG | M10 | 38 Nm | ||
| GS7D36SG | M12x50 | 66 Nm | ||
| Aluminium screws/bolts are not magnetic N54 | GS7D36SG | Replace screws Jointing torque and angle of rotation must be observed without fail | ||
| GS7D36SG | M12 | Jointing torque | 25 Nm | |
| Torque angle | 130 ° | |||
| 2AZ Oil filler plug | GS7D36SG | Replace screw | 25±3 Nm | |
| 3AZ Oil drain plug | GS7D36SG | Replace screw | 8 Nm | |
| 4AZ Transmission oil sump | GS7D36SG | 10±1 Nm |