61 31 192 Replacing knob for controller

Special tools required:

NOTE:

Partially fit special tool 00 9 317 as illustrated.

Lever out knob for controller (1) from controller (2) and remove towards top.

Fig 1: Removing Knob For Controller

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Risk of damage!
Install knob for controller only when controller is installed.

Installation:

Fit knob for controller (1) so that guides (2) are correctly seated in mountings (3).

Fig 2: Identifying Controller, Guides And Mountings

Courtesy of BMW OF NORTH AMERICA, INC.