65 75 071 Removing and installing (replacing) module for passenger compartment sensor

Necessary preliminary tasks: 

• Remove complete ceiling light (rear)  . See 63 31 004 REMOVING AND INSTALLING OR REPLACING COMPLETE CEILING LIGHT (REAR, WITH MODULE FOR PASSENGER COMPARTMENT PROTECTION) .

Open retaining hooks (1) and feed module for passenger compartment sensor (2) in direction of arrow out of trim (3) and remove.

Installation: 

Retaining hooks (1) must not be damaged.

Fig 1: Identifying Passenger Compartment Sensor And Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Carry out programming/coding  .