63 21 057 Replacing a socket housing for left or right rear light (rear lid)

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

WARNING: Follow instructions for HANDLING LIGHT BULBS (EXTERIOR LIGHTS) .

Unfasten plug connection (1) and disconnect.

Unlock locking clip (2) in direction of arrow and remove socket housing for rear light (3) from rear light (4).

NOTE: Convert bulbs, replace if necessary.
See TYPE OF BULB .

Fig 1: Removing Socket Housing From Rear Light

Courtesy of BMW OF NORTH AMERICA, INC.