65 12 070 Removing and installing/replacing amplifier

WARNING: This page is about a different variant/trim than selected.

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DISCHARGE (ESD PROTECTION) .

Necessary preliminary tasks:

Unfasten plug connection (2) and disconnect.

Release screws (1).

Remove amplifier (3) complete with holder (4).

Fig 1: Identifying Amplifier With Plug Connection, Screws And Holder

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement

Release screw (2).

Unscrew nuts (4).

Remove amplifier (1) from holder (3).

Fig 2: Identifying Amplifier With Nuts, Screw And Holder

Courtesy of BMW OF NORTH AMERICA, INC.