41 33 040 Replacing Front Left Or Right Side Wall Holder: Notes
WARNING: This page is about a different variant/trim than selected.
NOTE:
Read general service information under BODY, GENERAL .
Side wall removed.
Transfer the systematic diagram onto the respective holder version.
General information:
Observe REPAIR STAGE 2 !
Following new body parts are required (refer to BMW Electronic Parts Catalogue):
- (1) Holder, side wall, front (variant 1)
- (2) Holder, side wall, front (variant 2)
Following CONSUMABLES are required:
| Material | Quantity |
|---|---|
| Adhesive K5a | 1 |
| Blind rivets N3 | 2 |
| Cleaning agent R1 | 1 |