41 00... Riveting steel parts
WARNING: This page is about a different variant/trim than selected.
1.0 Recommended tools and equipment
- Manual riveting tool for blind rivet nuts and bolts.
2.0 Setting blind rivet nuts and blind rivet bolts
- Drill holes (0.2 mm larger than the outside diameter of the blind rivet nuts or blind rivet bolts).
- Blind rivet nuts and bolts must have a special coating for corrosion reasons.
Use the blind rivet nuts and bolts supplied in the case of the manual riveting tool for steel only!
- Insert blind rivet nuts or bolts and tighten down with the riveting tool.