52 26 020 Removing and installing/replacing both backrests for rear seat
WARNING: This page is about a different variant/trim than selected.
Necessary preliminary tasks
- Remove ARMREST SIDE SECTION
- Remove REAR SEAT
NOTE:
A 2nd person is required to help remove and install the backrest.
Left backrest:
- Release screw (1).
Tightening torque 52 26 01AZ .
- Lay belt (2) around center armrest
- Fold backrest forwards slightly (3)
- Pull backrest forwards and outwards out of center mount (4)
Right backrest:
- Release screw (1).
Tightening torque 52 26 01AZ .
- Fold backrest forwards slightly (2)
- Pull backrest forwards and outwards out of center mount (3)