52 14... Removing and installing carrier for outer cover on left or right front seat (electric)

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks

Detach cable strap (1).

Unlock and disconnect plug connections (2) on servodrive.

Unscrew bolt (3).

Tightening torque 52 10 04AZ .

Unclip carrier in marked area and remove.

Installation:

Replace cable strap.

Fig 1: Locating Plug Connections On Servodrive

Courtesy of BMW OF NORTH AMERICA, INC.

Make sure carrier is correctly seated on seat mechanism.