67 13 001 Replacing drive unit for electrically operated left or right door mirror

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

Remove MIRROR GLASS for mirror

Release screw (1).

Remove drive for electrically operated door mirror (2) in direction of arrow from mirror housing (3).

Fig 1: Removing Drive For Electrically Operated Door Mirror

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Fit drive for electrically operated door mirror (1) so that pin housing (2) engages exactly in plug housing (3) and locators (4) slide into guides (5).

Fig 2: Identifying Electrically Operated Door Mirror, Pin Housing, Plug Housing And Locators

Courtesy of BMW OF NORTH AMERICA, INC.