31 35 005 Removing and installing/replacing push rod (stabilizer link) for left/right stabilizer

Note (M3 only): 

Make sure stabilizer link is installed in correct position.

1. Connection, stabilizer link to spring strut
2. Connection, stabilizer link to stabilizer

Fig 1: Identifying Connections Of Stabilizer Link To Spring Strut And Stabilizer Link To Stabilizer

Courtesy of BMW OF NORTH AMERICA, INC.

Release nut (1) and remove bracket for brake hose.

Release nut (3) and remove stabilizer link (2).

Installation: 

Replace self-locking nuts.

Tightening torque 31 35 2AZ .

Fig 2: Identifying Nuts For Brake House Bracket And Stabilizer Link

Courtesy of BMW OF NORTH AMERICA, INC.