17 11 000 Removing and installing radiator (N51, S65)
WARNING: This page is about a different variant/trim than selected.
WARNING:
Danger of scalding!
Only perform this work after engine has cooled down.
Only perform this work after engine has cooled down.
IMPORTANT:
Wear protective goggles and gloves.
Necessary preliminary tasks:
- Follow INSTRUCTIONS FOR WORKING on cooling system
- Remove intake duct (S65).
- Remove INTAKE FILTER HOUSING
- Remove FAN COWL
- Draining COOLANT
- Unlock coolant hoses and detach
If fitted:
- Remove heat exchanger for automatic transmission fluid
Automatic only
Release bolt and detach hose (1).
Release screws.
Carefully feed out radiator (1) towards top and remove.
NOTE:
Illustration shows N54.