13 90 500 Replacing tank venting valve (S65)

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks

Read out fault memory of DME control unit; if necessary, work through test schedules
Switch off ignition
Remove intake air manifold

NOTE: The tank venting valve is fitted under the intake air manifold.

Unlock connector and remove.

Unlock hose on tank venting valve and disconnect.

Release clamp, detach hose.

Release bolt on bracket.

Remove tank venting valve.

Fig 1: Locating Bolt On Bracket

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Now clear the fault memory.