64 11 850 Replacing servodrive for rear compartment flap

WARNING: This page is about a different variant/trim than selected.

IMPORTANT: Servomotors must be re-addressed in the event of replacement!
Addressing can only be carried out with the BMW diagnosis system.
Service functions:

Body
Heating and A/C function
Flap motors
Re-address flap motors

Necessary preliminary tasks:

Remove TRIM FOR INSTRUMENT PANEL , bottom right

Unfasten plug connection (1) and disconnect.

Release screws (2).

Detach servodrive for rear compartment flap (3) in direction of arrow from heater/air conditioner (4).

Installation:

Place servodrive for rear compartment flap (3) exactly onto heater/air conditioner (4).

Fig 1: Removing Rear Compartment Flap Servodrive From Heater/Air Conditioner

Courtesy of BMW OF NORTH AMERICA, INC.