86 10... Replacing bar

Remove lashing eyes (1).

Fig 1: Identifying Lashing Eyes

Courtesy of BMW OF NORTH AMERICA, INC.

Remove protective caps (1) on left/right.

Fig 2: Identifying Protective Cap

Courtesy of BMW OF NORTH AMERICA, INC.

Release hexagon screws (1) and countersunk head screws (2) on left/right.

Remove bar.

Installation 

Tightening Torque for hexagon screw,

Refer to TIGHTENING TORQUE 86 10 2AZ.

Tightening Torque for countersunk head screw,

Refer to TIGHTENING TORQUE 86 10 3AZ.

Fig 3: Identifying Hexagon Screw And Countersunk Head Screws

Courtesy of BMW OF NORTH AMERICA, INC.