86 10... Disassembly of rear apron

WARNING: This page is about a different variant/trim than selected.

Cut through sealing compound (1) on left and right and remove.

Drill out rivets (2) on left and right sides on lower apron edge.

Installation

Use Sikaflex 221 as sealing compound.

Fig 1: Identifying Lower Apron Sealing Compound And Rivets

Courtesy of BMW OF NORTH AMERICA, INC.

Cut through sealing compound (1) and remove.

Drill out rivets (2).

Installation

Use Sikaflex 221 as sealing compound.

Fig 2: Identifying Lower Apron Sealing Compound And Rivets

Courtesy of BMW OF NORTH AMERICA, INC.