51 34 211 Replacing rubber guide for rear left or right door window

WARNING: This page is about a different variant/trim than selected.

IMPORTANT: The "INSTRUCTIONS ON FITTING WINDOW GUIDE SEALS " serve as the basis for this repair instruction and must be observed without fail.

Necessary preliminary tasks

E91 only:

NOTE: Window cavity cover strip does not have to be removed.

Lever out rubber guide (1) on door window frame at front (2) with special tool 00 9 317.

Fig 1: Removing Rubber Guide On Door Window Frame Using Special Tool (00 9 317)

Courtesy of BMW OF NORTH AMERICA, INC.

Pull rubber guide (1) out of window guide.

Detach rubber guide (1) in direction of arrow from door.

Fig 2: Pulling Rubber Guide From Window Guide

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Moisten rubber guide (2) prior to fitting with APPROVED ANTI-FRICTION AGENT .

Close door window glass (1) a little.

Push rubber guide (2) onto door window glass (1) and into window guide (3).

Fig 3: Pushing Rubber Guide On Door Window Glass And Window Guide

Courtesy of BMW OF NORTH AMERICA, INC.