51 34 171 Replacing rear left or right door window

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks

Open door window glass (1) down to distance (A)

A = approx. 120 mm

Fig 1: Identifying Door Window Glass Distance

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Disconnect plug connection (1) from power window motor (2) (risk of trapping).

Lever out catches (3) with screwdriver (4) in direction of arrow.

Installation:

Catch (3) must be correctly clipped into place.

Carry out function check on power window unit and anti-trapping protection.

If necessary, NORMALIZE power window unit.

Fig 2: Disconnecting Plug Connection From Power Window Motor

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Following parts of window guide (3) must not be damaged or missing:

Fig 3: Identifying Catch, Bump Stop And Window Guide

Courtesy of BMW OF NORTH AMERICA, INC.

Remove door window glass (1) towards top.

Installation:

Door window glass does not need to be adjusted.

Fig 4: Removing Door Window Glass

Courtesy of BMW OF NORTH AMERICA, INC.