71 60... Replacing complete trailer tow hitch
WARNING: This page is about a different variant/trim than selected.
IMPORTANT:
When retrofitting a trailer tow hitch, it is absolutely essential to read and comply with the NOTES ON RETROFITTING A TRAILER TOWING DEVICE
.
Necessary preliminary tasks
- Remove rear bumper trim
- If necessary, release exhaust system suspension elements
Release screws (1) on both sides.
Unclip cable from fixture.
Remove trailer tow hitch support member (2).
Disconnect all plug connections.
Tightening torque 71 60 1AZ .
Installation:
Only vehicles up to production date 07 March 2005:
Knock out studs (1) towards inside and replace with M12x40 hexagon bolts.
Tightening torque 71 60 1AZ .