51 45... Replacing side cover on instrument panel

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks

Unclip cover (1) with special tool 00 9 340 in direction of arrow from instrument panel trim (2).

If necessary, disconnect associated plug connection.

Fig 1: Unclipping Cover From Instrument Panel Trim Using Special Tool (00 9 340)

Courtesy of BMW OF NORTH AMERICA, INC.

Catches (1) of cover (2) must not be damaged.

Fig 2: Identifying Catches And Cover

Courtesy of BMW OF NORTH AMERICA, INC.

If replacing version with Isofix system version:

Remove switch for passenger airbag deactivation.