51 33 000 Removing and installing (replacing) power window regulator in left or right front door

WARNING: This page is about a different variant/trim than selected.

NOTE: Disengage, but do not remove, door window and secure in the door window frame.

Necessary preliminary work:

Unscrew nuts (1).

Feed out rear section of power window unit (2) in direction of arrow.

Tightening torque 51 33 1AZ .

Fig 1: Removing Power Window Unit Rear Section

Courtesy of BMW OF NORTH AMERICA, INC.

Feed out front section of power window unit (1) with flat motor (2) in direction of arrow from front door.

Replacement

Fig 2: Removing Power Window Unit Front Section With Flat Motor

Courtesy of BMW OF NORTH AMERICA, INC.