51 21 280 Removing and installing/replacing door stop on left or right front door

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks

NOTE: Graphics used come from the E87.

NOTE: Secure front door against falling closed.

Release screw (1).

Tightening torque 51 21 3AZ.

Unfasten screws (2).

Tightening torque 51 21 4AZ.

Remove seal (3).

Installation:

Seal (3) must not be damaged.

Fig 1: Identifying Seal And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Remove door retainer (1) via cutout (2).

Fig 2: Identifying Door Retainer And Cutout

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Following parts of door retainer (3) must not be damaged:

Fig 3: Identifying Door Retainer With Hinge And Thread

Courtesy of BMW OF NORTH AMERICA, INC.