51 21 180 Removing and installing/replacing cover on outside door handle

WARNING: This page is about a different variant/trim than selected.

Lever out cap (1) and release screw underneath.

Installation:

If necessary, replace faulty trim (1).

Fig 1: Identifying Cap

Courtesy of BMW OF NORTH AMERICA, INC.

Pull off cover (1) in direction of arrow with outside door handle (2) opened slightly.

Fig 2: Pulling Off Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Version with light package:

Installation:

Make sure outside door handle light (1) is correctly positioned in area (2).

Guides (3) of outside door handle light (1) must be correctly seated in carrier for outside door handle (4).

Fig 3: Identifying Door Handle Light, Guides Door Handle Light And Outside Door Handle

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Guides (1) must not be damaged.

Fig 4: Identifying Guides

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement

NOTE: Similar to graphic.

Detach cover (2) from filler piece (3).

Installation:

Catches (1) of cover (2) must not be damaged.

Fig 5: Detaching Cover From Filler Piece

Courtesy of BMW OF NORTH AMERICA, INC.