51 11 180 Removing and installing/replacing center grille for bumper trim

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks

Release catches (1) and remove center grille (2).

Installation:

Catches (1) must not be damaged

Fig 1: Identifying Centre Grille And Catches

Courtesy of BMW OF NORTH AMERICA, INC.

Necessary preliminary tasks

Version with ACC:

6-cylinder models without ACC only:

Release catches (1) from inside, taking care not to damage catch (2).

Remove trim (3) towards front.

Installation:

Catches (1 and 2) must not be damaged.

Fig 1: Releasing Catches

Courtesy of BMW OF NORTH AMERICA, INC.

Release catches (1) on bumper trim (2).

Installation:

Catches (1) on bumper trim (2) must not be damaged.

Fig 2: Identifying Catches And Bumper Trim

Courtesy of BMW OF NORTH AMERICA, INC.