61 61 041 Replacing both windscreen wiper blades

WARNING: This page is about a different variant/trim than selected.

IMPORTANT: Make sure the wiper arm does not contact the windscreen without its wiper blade.

Fold wiper arm (3) away from windscreen.

Press lock (1) and remove cover cap (2) in direction of arrow.

Installation:

Make sure cover cap (2) is correctly seated.

Fig 1: Removing Cover Cap

Courtesy of BMW OF NORTH AMERICA, INC.

Turn windscreen wiper blade (1) at an angle of 90° and remove from windscreen wiper arm (2).

Fig 2: Turning Windscreen Wiper Blade At An Angle Of 90 °

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Catches (1) and guide (2) of window cavity cover cap (6) must not be damaged or missing.

Fig 3: Identifying Window Cavity Cover Cap Catches And Guide

Courtesy of BMW OF NORTH AMERICA, INC.