61 31 241 Removing and installing/replacing right hood/bonnet contact switch (M3)

WARNING: This page is about a different variant/trim than selected.

Lever bonnet/hood contact switch (1) with special tool 641020 out of microfilter housing upper section (2).

Disconnect plug connection (3) and remove bonnet/hood contact switch (1).

Fig 1: Removing Bonnet/Hood Contact Switch Using Special Tool (64 1 020)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Make sure bonnet/hood contact switch (1) is correctly seated in microfilter housing upper section (2).