61 31 133 Removing and installing/replacing AV connection socket

WARNING: This page is about a different variant/trim than selected.

IMPORTANT: Grip behind trim (1) from below and release catch (2) (risk of damage).

NOTE: Version with rear air conditioning is shown.

Fig 1: Releasing Catch

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Catches (1 and 3) and guides (2) must not be damaged.

Fig 2: Identifying Catches And Guides

Courtesy of BMW OF NORTH AMERICA, INC.

Lever AV connection socket (1) with a suitable tool (2) upwards out of storage compartment (3).

Fig 3: Removing AV Connection Socket Using Tool

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Remove AV connection socket (2) upwards out of storage compartment (3).

Installation:

Locks (4) must not be damaged.

Make AV connection socket (1) is correctly seated in storage compartment (3).

Fig 4: Identifying Storage Compartment With AV Connection Socket, Plug Connection And Locks

Courtesy of BMW OF NORTH AMERICA, INC.