61 35 954 Removing and installing/replacing interior antenna for comfort access system (rear)

WARNING: This page is about a different variant/trim than selected.

IMPORTANT: Carefully unclip catches (2) on trim (1) (risk of damage).

Move with special tool 00 9323 SCRAPER from below behind trim (1) and release catches (2).

Release trim (1) towards rear from catches (3).

If necessary, disconnect plug connections and remove trim (1).

Fig 1: Releasing Catch

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Catches (1 and 3) must not be damaged.

Guides (2) must not be damaged

Fig 2: Identifying Catches And Guides

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Unlock retaining hook (2) and remove luggage compartment antenna for comfort access system (3).

Fig 3: Identifying Comfort Access System With Plug Connection And Retaining Hook

Courtesy of BMW OF NORTH AMERICA, INC.