00 00... Body: Check for corrosion (except cavities)

WARNING: This page is about a different variant/trim than selected.

Visually inspect underbody and attachment parts (brake lines, exhaust system branch, sills) for corrosion and check for damage.
Check wheel arches for corrosion.
Open doors and check A, B and C-pillars for corrosion, especially door hinges.
Check door frame for corrosion, folding back door seal slightly if necessary.
Check outer body for stone impacts, scratches or damage to paintwork and associated corrosion.

IMPORTANT: If damage to the underbody is identified:

If necessary, remove panels from underbody.
Check mountings and fixtures and brake and fuel lines for damage, corrosion and correct installation position.

Rectify identified faults after consulting with customer and issue a separate invoice.