86 21 Hood
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - HOOD
| Type | thread | tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Roof railing, front and rear, to roof railing adapter | M8 | 22.5 Nm | ||
| 2AZ Roof railing, middle, to roof railing adapter | M8 | 22.5 Nm | ||
| 3AZ Roof railing, front and rear, to support | M6 | 15 Nm | ||
| 4AZ Roof railing, middle, to support | M6 | 10 Nm | ||
| 5AZ Upper lock striker fixture to lower lock striker fixture | M8 | 27 Nm | ||
| 6AZ Hinge, side lid, to support | M8 | 27 Nm | ||
| 7AZ Support, lid to lid | M8 | 23 Nm | ||
| 8AZ Screw, depth adjustment, side lid | M8 | 27 Nm | ||
| 9AZ Screw, depth adjustment, rear lid | M8 | 27 Nm | ||
| 10AZ Ball pivot to retaining bracket | M8 | 23 Nm | ||
| 11AZ Retaining bracket to support | M8 | 27 Nm | ||
| 12AZ Rotary striker lock to support | M5 | 7 Nm |