64 12 Independent heater
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - INDEPENDENT HEATER
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Muffler to independent heater bracket | E90, E91, E92, E93 | M6 | 8.0 Nm | |
| 2AZ Mounting, independent heater, to engine carrier | E90, E91, E92, E93 | M6 | 7.6 Nm | |
| 3AZ Mounting, independent heater, to locator, cooling module | E90, E91, E92, E93 | 19.5 Nm | ||
| 4AZ Rubber mount to independent heater | E90, E91, E92, E93 | 8.0 Nm |